Establish high-bandwidth, long-range wireless backhaul without digging trenches or laying expensive fiber-optic cables. This outdoor wireless bridge utilizes advanced 5.8GHz 802.11ac technology, delivering up to 900Mbps throughput across a massive 10km point-to-point line-of-sight.
Key Engineering Highlights
- Long-Range Dual Antenna: Features an integrated 16dBi dual-polarized directional patch antenna, concentrating signal power to maintain high throughput even in noisy industrial zones.
- 900Mbps Throughput: Built on high-performance Qualcomm chips, supporting multi-lane IP camera streams, thermal sensors, and PTZ telemetry simultaneously without dropouts.
- All-Weather Protection: IP65 waterproof housing with custom UV stabilizers and high-torque pole mounting rings resists severe storms, snow accumulation, and scorching summer sun.
- Power over Ethernet (PoE): Supports standard 24V passive PoE or 48V active PoE, letting you run power and data over a single outdoor Cat6 cable up to 100 meters.
Engineering Specifications
| Parameter | Value |
|---|---|
| Wireless Frequency | 5.8 GHz (Interference-free band) |
| Throughput Max | 900 Mbps (802.11ac standard) |
| Antenna gain | 16 dBi Dual-Polarized Directional |
| Max Point-to-Point Distance | 10 km (Line-of-Sight, clear environment) |
| PoE Support | 24V Passive PoE (included injector) / DC 12V |
Typical Field Scenarios
The ultimate solution for oil field perimeters, agricultural farming hubs, solar energy stations, distant guard shacks, highway speed trap surveillance, and multi-facility industrial campus network sharing.
Procurement Note: Standard wholesale kit includes a pre-configured, auto-paired transmitter/receiver set. Plug-and-play installation straight out of the box. Request a B2B volume discount quote.
Recommended Pairings
- SUS304 Pole Mount Bracket — Co-mount CPE and PTZ on same pole
- 300W Solar Power System — Off-grid power for remote wireless nodes
- FTD-16CH AI Analytics Server — Edge AI NVR for intelligent monitoring
The 120W Industrial Solar Kit is an off-grid solar power solution designed for security cameras and remote industrial monitoring equipment in locations where fixed electrical infrastructure is unavailable or difficult to extend. It provides a practical power foundation for remote PTZ cameras, 4G routers, and monitoring sensors used by security integrators, industrial operators, and project-based surveillance deployments, helping extend monitoring coverage to isolated industrial sites, infrastructure perimeters, and other off-grid locations. OEM/ODM customization and project-based integration support are available for complete remote surveillance solutions.
A fully off-grid, rugged solar power system designed to power PTZ cameras, wireless bridges, and edge AI equipment anywhere the grid cannot reach. Combining a high-efficiency mono-crystalline solar panel with a deep-cycle LiFePO4 battery pack, this system ensures 24/7 continuous operation even through 3-4 consecutive cloudy or rainy days.
Key Engineering Highlights
- Mono-Crystalline Solar Panel: Heavy-duty 300W high-efficiency mono panel captures maximum solar energy, performing reliably even under low-light autumn conditions.
- LiFePO4 Lithium Battery Pack: High-capacity 180AH Lithium Iron Phosphate battery pack delivers up to 3000 charge/discharge cycles, lasting 3x longer than traditional lead-acid batteries.
- Smart MPPT Charge Controller: Integrated Maximum Power Point Tracking (MPPT) controller maximizes charging efficiency by 15-20% and prevents overcharging, overdischarging, and short circuits.
- All-in-One Rugged Enclosure: Industrial waterproof steel box holds the battery and MPPT controller safely underground or pole-mounted, keeping them cool and dry.
Engineering Specifications
| Parameter | Value |
|---|---|
| Solar Panel Power | 300 Watt (Mono-crystalline silicon) |
| Battery Chemistry | Lithium Iron Phosphate (LiFePO4) |
| Battery Capacity | 180 AH / 12V (Approx. 2160 Watt-hours) |
| Charge Controller Type | 30A Smart MPPT (with dynamic tracking) |
| Waterproof Grade | IP66 Waterproof Metal Battery Box |
Typical Field Scenarios
Widely deployed in remote solar power plants, mountain weather logging stations, agricultural farms, fish ponds, border patrol cameras, forest fire watchtowers, and highway highway speed cameras.
Procurement Note: Standard wholesale packages include customized mounting structures (pole mount or ground mount) and custom wire harnesses. Discuss your off-grid project specifications with Fengtaida today.
Recommended Cameras for Off-Grid Deployment
- Long Range Camera Systems — Ultra-long range PTZ for remote areas
- 10km Wireless Bridge — Pair with solar for fully wireless remote nodes
FTD-FA3-E2540 — 4MP 25x Optical Zoom Indoor Ceiling PTZ Camera
The FA3 series indoor ceiling PTZ camera combines a high-definition 4MP Sony sensor with a powerful 25x optical zoom. Designed for discreet indoor surveillance, it offers exceptional detail and flexible coverage for large interior spaces.
Key Features
- 4MP Ultra HD Resolution — Captures crystal-clear 2688×1520 video for precise identification.
- 25x Optical Zoom — Monitor large areas with incredible detail even from a distance.
- Sony CMOS Sensor — 1/2.9" Sony sensor ensures excellent image quality and color reproduction.
- PoE Support — Simplifies installation by delivering power and data over a single cable.
- High-Speed PTZ — Smooth 360° rotation and 0.1-180°/s pan speed for rapid target tracking.
- Advanced Compression — H.265/H.264+ saves up to 50% on storage and bandwidth.
Technical Specifications
| Sensor | 1/2.9" Sony CMOS |
| Resolution | 4MP (2688×1520) |
| Zoom | 25x Optical, 16x Digital |
| Focal Length | 5.0-125mm |
| Pan/Tilt | Pan 360°, Tilt -15° to 90° |
| Compression | H.265/H.264+ |
| Mounting | Indoor Ceiling Mount |
Typical Applications
- Shopping malls and retail stores
- Hotel lobbies and conference centers
- Warehouse interior monitoring
- Office building security
OEM / ODM Available
Fengtaida supports full OEM and ODM customization for FA3 series PTZ cameras. Contact our team — we respond within 24 hours.
Professional Installation Hardware
Achieve a stable, industrial-grade installation by pairing this camera with our ADC12 die-cast mounting components:
- Heavy-Duty Wall Mount / SUS304 Pole Mount — Anti-vibration structures for precision PTZ tracking.
- IP66 Power Enclosure — Clean cable management and weather protection.
- Long-Range Wireless Bridge — Point-to-point data link for large-scale sites.
A high-speed, versatile indoor dome camera engineered for commercial offices, banks, retail complexes, and hotel lobbies. The FA3 dome is designed to blend seamlessly into architectural ceilings while delivering silent, lightning-fast pan-tilt-zoom control for real-time indoor coverage.
Key Engineering Highlights
- In-Ceiling Flush Design: Supports both standard wall mounting and flush in-ceiling installation, presenting a neat, professional finish without exposed cables.
- 10x Optical Zoom: Clear optical zoom lens paired with high-definition sensors lets operators monitor cash registers, teller counters, and entrance lobbies with absolute clarity.
- Silent Drive System: High-precision stepper motor drive provides smooth, silent movement, avoiding disturbing patrons or customers during operation.
- Two-Way Audio Matrix: Built-in professional microphone and high-power speaker support clear two-way voice communication and real-time audio analytics.
Engineering Specifications
| Parameter | Value |
|---|---|
| Optical Zoom | 10x Optical / Auto-focus / Premium glass optics |
| Installation Options | In-Ceiling Flush / Ceiling Mount / Wall Mount |
| Audio Support | Two-Way Audio (Built-in mic and speaker) |
| PT Preset Speed | Pan: 120°/s, Tilt: 90°/s |
| Network Interface | 10/100M RJ45, supports PoE (802.3af) |
Typical Field Scenarios
The premier security solution for banking halls, commercial office buildings, high-end hotel receptions, retail checkout zones, airport terminals, and data centers.
Procurement Note: We offer customized casing colors (matte black / polished white), custom software SDKs, and pre-integrated PoE packages for bulk wholesale orders. Request our commercial pricing catalog today.
Professional Installation Hardware
Achieve a stable, industrial-grade installation by pairing this camera with our ADC12 die-cast mounting components:
- Heavy-Duty Wall Mount / SUS304 Pole Mount — Anti-vibration structures for precision PTZ tracking.
- IP66 Power Enclosure — Clean cable management and weather protection.
- Long-Range Wireless Bridge — Point-to-point data link for large-scale sites.
Unlock AI Intelligence for Your Existing Camera Network
The FTD-16CH AI BOX is a purpose-built edge AI computing device designed to retrofit intelligence into legacy camera groups — without replacing a single camera. Ideal for system integrators and project contractors managing large-scale surveillance deployments.
Key Advantages
- 16-Channel Standard / 32-Channel Max — Simultaneously processes up to 16 IP camera streams out of the box, expandable to 32 channels for large-scale deployments
- 6 TOPS AI Computing Power — Dedicated neural processing unit delivers real-time inference for multiple AI tasks in parallel
- Zero Camera Replacement — Connects directly to your existing RTSP/ONVIF IP cameras via RJ45, upgrading them with AI analytics instantly
- Multi-Algorithm Support — Face recognition, behavior detection, license plate identification, vehicle tracking, crowd analysis, and more
- Industrial-Grade Reliability — Fanless aluminum alloy chassis with passive cooling, built for 24/7 continuous operation in demanding environments
- Flexible Connectivity — USB 2.0, USB 3.0, OTG, HDMI output, RJ45 Gigabit Ethernet, SIM card slot (4G), Wi-Fi antenna port
Technical Specifications
| Parameter | Specification |
|---|---|
| AI Computing Power | 6 TOPS |
| Standard Channels | 16 Channels |
| Max Channels | Up to 32 Channels |
| Video Input | RTSP / ONVIF IP Cameras |
| Network | RJ45 Gigabit Ethernet + Wi-Fi + 4G (SIM) |
| Interfaces | USB 2.0 × 2, USB 3.0 × 1, OTG × 1, HDMI × 1 |
| Alarm I/O | Terminal block (4-in / 4-out) |
| Power Supply | DC 12V IN |
| Cooling | Fanless passive cooling (aluminum alloy heatsink) |
| Installation | Wall mount / rack mount compatible |
Typical Applications
- Parking lots & traffic management
- Factory & warehouse access control
- Retail footfall & behavior analytics
- School & campus safety monitoring
- Smart city legacy camera upgrades
Why Choose FTD-16CH AI BOX?
Most AI cameras require full hardware replacement — an expensive, disruptive process for large installations. The FTD-16CH AI BOX takes a smarter approach: deploy one box, connect your existing cameras, and enable enterprise-grade AI analytics within hours. Perfect for integrators who need to deliver AI-powered solutions on tight budgets and timelines.
OEM/ODM customization available. Contact us for project pricing and volume inquiries.
Recommended AI-Compatible Hardware
Maximize the accuracy of deep learning analytics by pairing the AI Box with these high-resolution data sources:
- IR6 4K PTZ Camera — 8MP resolution provides the metadata depth needed for face and vehicle recognition.
- IRS2 Air-Wiper Series — Ensures clear visual data for AI analytics even during heavy rain or fog.
36CH AI Network Video Recorder for Professional IP Surveillance
The FTD-N3364 is a 36-channel network video recorder for centralized IP camera recording, playback and AI-assisted video search. It supports 36-channel 4K camera input, dual Gigabit Ethernet ports, face capture and face comparison workflows, and four internal SATA storage interfaces for large surveillance deployments.
Key Benefits
- 36-channel 4K input: Connect and manage up to 36 IP camera streams, subject to camera and system configuration.
- AI-assisted face workflows: Support human figure detection, face capture, face comparison and a built-in face database for up to 1,000 faces.
- Flexible evidence search: Search recordings by name or facial image, and use time-bar and smart-event playback to locate footage faster.
- High-capacity local storage: Four SATA 2.0 interfaces support up to 14TB per drive, subject to the selected HDD and system configuration.
- Integrator-friendly connectivity: Dual 10/100/1000Mbps Ethernet, ONVIF support, HDMI/VGA output, two USB 2.0 ports and network PTZ control.
Technical Specifications
| Model | FTD-N3364 |
|---|---|
| System | A1X main chip; embedded Linux; graphical interface with mouse and keyboard support |
| Video input | 36-channel 4K IP camera input; NTSC up to 30fps and PAL up to 25fps |
| Video output | 1 HDMI and 1 VGA; HDMI supports synchronous audio output |
| Compression | H.264 / H.265, when supported by the connected camera |
| AI functions | Human figure detection, face capture, face comparison, motion detection, image occlusion, out-of-bounds, electric fence, off-duty detection and passenger statistics; camera support may be required |
| Face database | Up to 1,000 faces |
| Face comparison modes | Documented 36CH, 32CH, 25CH and 16CH formats with different AI channel allocations; exact mode depends on system and camera configuration |
| Playback | Up to 4-channel playback in 36-channel mode; supported resolution profile depends on mode/configuration |
| Storage | 4 SATA 2.0 interfaces; up to 14TB per interface |
| Network | 2 × RJ45 adaptive 10/100/1000Mbps Ethernet ports; ONVIF; network PTZ control |
| Audio | G.711U, G.711A and G.726; HDMI audio output; 3.5mm audio output; speaker connection supported |
| USB | 2 × USB 2.0 |
| Power | AC 100–240V, 50–60Hz; ≤15W without HDD |
| Working environment | -10°C to +50°C; 10%–95% RH |
| Dimensions / weight | 440 × 365 × 70mm; 4.25kg |
Integration and Use
Use the FTD-N3364 as the recording and management layer for multi-camera IP surveillance systems. It supports remote monitoring and playback through EasyVMS software and the HiEasy app, plus ONVIF-based integration and network PTZ control. Camera-dependent functions, AI channel allocation, storage selection and playback profiles should be confirmed against the final camera list before deployment.
Frequently Asked Questions
How many cameras can the FTD-N3364 connect?
It supports 36-channel 4K IP camera input. AI face capture and comparison channel allocation varies by system format and camera capability.
How much storage can it support?
It has four SATA 2.0 interfaces, with each interface supporting up to 14TB according to the supplied specification sheet.
Does it support ONVIF and remote access?
Yes. The specification lists ONVIF support, EasyVMS remote monitoring and playback, and HiEasy mobile monitoring.
Can it search video using a face image?
Yes. The documented search functions include searching video by person name and facial image, subject to the connected camera and configured AI functions.
Request a Quote: Share your camera count, resolution profile, AI requirements, HDD plan and deployment environment so the configuration can be reviewed against the final project.
FTD-PTZD Spectrum Network Positioning System — High-Precision Multi-Spectrum Positioning for Critical Infrastructure
The FTD-PTZD series is a high-end network positioning system designed for long-range surveillance and all-weather monitoring. Combining advanced multi-spectrum imaging with high-torque positioning mechanics, it offers unparalleled accuracy for border security, emergency command, and large-scale site protection.
Key Features
- Multi-Spectrum Imaging — Integrates visible and specialized sensors for superior situational awareness in any lighting condition.
- High-Precision Positioning — Features precise pan/tilt movement with zero-backlash for accurate tracking and targeting.
- Rugged All-Weather Design — IP67-rated housing ensures reliable operation in extreme temperatures and harsh environments.
- Network-Centric Management — Full integration with modern VMS platforms for remote monitoring and automated alerts.
Technical Specifications
| Parameter | Value |
| Product Series | FTD-PTZD |
| Imaging Mode | Multi-Spectrum (Visible/Thermal Optional) |
| Positioning Accuracy | High-Precision Stepper/Servo Control |
| Environmental Rating | IP66 / IP67 |
| Network Protocol | ONVIF, RTSP, SDK Support |
*Note: As a high-end customized product, full technical specifications vary by configuration. Please contact our technical team for the complete datasheet.
Typical Applications
- Border & Perimeter Security
- Emergency Command Centers
- Maritime & Port Surveillance
- Critical Infrastructure Protection
OEM / ODM Available
Fengtaida supports full OEM and ODM customization — including firmware branding, housing color, lens configuration, and packaging. Contact our team — we respond within 24 hours.
Infrastructure Integration: Off-Grid & Long-Range Wireless
For critical infrastructure projects (maritime, border, or forest fire detection), we recommend integrating these positioning systems with our autonomous power and data solutions:
- Autonomous Solar Power (300W/180AH) — Reliable 24/7 power for remote long-range cameras.
- Industrial Wireless Backhaul (10km) — High-throughput video transmission without trenching.
- Edge AI Analytics Server — Deep learning backend for long-range target identification.
FTD-PTZH Long Range Pan Tilt Zoom Camera — Ultra-Long Range Surveillance for Maritime and Border Security
The FTD-PTZH is engineered for extreme distance, providing clear, high-definition imaging over several kilometers. It is the professional choice for monitoring expansive areas such as international borders, coastal lines, and major airports where early detection is vital.
Key Features
- Extreme Optical Zoom — Equipped with ultra-long focal length lenses (up to 1200mm) to identify targets at vast distances.
- Long-Range Illumination — Supports advanced synchronized laser illumination for night-time visibility up to 1000m-2000m.
- Stabilized PTZ Performance — Precision engineering ensures stable, vibration-free imaging even at high zoom levels.
- Industrial-Grade Durability — Built to withstand corrosive coastal environments and extreme weather conditions.
Technical Specifications
| Parameter | Value |
| Product Series | FTD-PTZH |
| Optical Zoom Lens | 50x (15–750mm) / 80x (15–1200mm) Motorized Precision Zoom Lens |
| Night Vision System | 1000m–2000m Synchronized IR Laser Illuminator |
| Detection Range | Multi-Kilometer Human & Vehicle Recognition |
| Video & Protocol | ONVIF, RTSP, Pelco-D/P Protocol Compliant |
| Housing & Protection | Heavy-Duty Weatherproof Alloy (IP66 / Anti-Corrosion) |
*Note: As a high-end customized product, full technical specifications vary by configuration. Please contact our technical team for the complete datasheet.
Frequently Asked Questions (FAQ)
Q: What optical focal length options are available for the FTD-PTZH series?
A: Fengtaida provides factory-customized configurations with motorized high-magnification optical lenses, including 50x (15–750mm) and 80x (15–1200mm) zoom modules engineered for coastal, border, and critical infrastructure monitoring.
Q: How does the synchronized laser night vision operate at long distances?
A: The integrated laser illuminator dynamically synchronizes its beam angle with the optical zoom level, ensuring uniform illumination from 1000m up to 2000m without beam overexposure or dark edges.
Typical Applications
- Coastal & Maritime Security
- Border Patrol & Defense
- Airport Runway Monitoring
- Large Forest Fire Detection
OEM / ODM Available
Fengtaida supports full OEM and ODM customization — including firmware branding, housing color, lens configuration, and packaging. Contact our team — we respond within 24 hours.
Infrastructure Integration: Off-Grid & Long-Range Wireless
For critical infrastructure projects (maritime, border, or forest fire detection), we recommend integrating these positioning systems with our autonomous power and data solutions:
- Autonomous Solar Power (300W/180AH) — Reliable 24/7 power for remote long-range cameras.
- Industrial Wireless Backhaul (10km) — High-throughput video transmission without trenching.
- Edge AI Analytics Server — Deep learning backend for long-range target identification.
FTD-PTZM Spectrum Network Positioning System camera — Intelligent Thermal & Visible Fusion for 24/7 Security
The FTD-PTZM series integrates high-resolution visible sensors with advanced thermal imaging technology. This fusion capability allows for superior detection in complete darkness, smoke, or dense fog, making it an essential tool for all-weather critical site protection.
Key Features
- Dual-Sensor Fusion — Synchronized thermal and visible streams provide a comprehensive view in any environment.
- Thermal Sensitivity — High-sensitivity thermal core detects heat signatures through visual obstructions.
- Smart Analytics — Embedded AI for human/vehicle detection and perimeter breach alerts.
- Compact & Versatile — Optimized form factor for flexible installation on buildings, poles, or mobile platforms.
Technical Specifications
| Parameter | Value |
| Product Series | FTD-PTZM |
| Thermal Resolution | Professional Grade Thermal Imaging |
| Visible Resolution | High Definition Network Stream |
| Fusion Mode | Picture-in-Picture or Combined Overlay |
| Analytics | Intelligent Perimeter Protection |
*Note: As a high-end customized product, full technical specifications vary by configuration. Please contact our technical team for the complete datasheet.
Typical Applications
- Industrial Site Monitoring
- Warehouse Fire Prevention
- High-Security Perimeter Defense
- Search & Rescue Operations
OEM / ODM Available
Fengtaida supports full OEM and ODM customization — including firmware branding, housing color, lens configuration, and packaging. Contact our team — we respond within 24 hours.
Infrastructure Integration: Off-Grid & Long-Range Wireless
For critical infrastructure projects (maritime, border, or forest fire detection), we recommend integrating these positioning systems with our autonomous power and data solutions:
- Autonomous Solar Power (300W/180AH) — Reliable 24/7 power for remote long-range cameras.
- Industrial Wireless Backhaul (10km) — High-throughput video transmission without trenching.
- Edge AI Analytics Server — Deep learning backend for long-range target identification.
An ultra-rugged, highly precise heavy-duty PTZ camera positioning system designed for military-grade perimeters, border defense, and marine ports. Integrating a powerful worm-gear drive system, the FTD-PTZS operates continuously in wind forces up to level 12 and self-locks instantly in the event of a sudden power outage to preserve alignment.
Key Engineering Highlights
- Precision Positioning: Powered by an advanced micro-stepping stepper motor and a precision ground worm-gear, achieving preset accuracy up to ±0.05° with zero mechanical backlash.
- Multi-Sensor Platform: Heavy-duty payload platform supports visible zoom cameras, high-definition thermal imaging modules, and long-range laser illuminators simultaneously.
- Rugged Weather Shield: Sealed to IP66, with built-in internal heaters, defrosters, and air blowers, allowing reliable continuous operation from -40°C to +65°C (-40°F to 149°F).
- Smart Pan-Tilt control: Supports continuous 360° horizontal rotation and a +40° to -90° tilt range with proportional speed scaling for target tracking at high zoom levels.
Engineering Specifications
| Parameter | Value |
|---|---|
| PTZ Accuracy | ±0.05° (Ground Worm-Gear Drive) |
| Horizontal Rotation | 360° continuous rotation |
| Tilt Angle Range | +40° to -90° (with auto-flip and speed auto-scaling) |
| Ingress Protection | IP66 (NEMA 4X / Salt-spray resistant paint) |
| Operating Voltage | AC24V / DC24V (High-power surge protected) |
Typical Field Scenarios
Specifically engineered for demanding security missions: national border perimeters, seaport vessel monitoring, airport airfield security, forest fire detection, oil/gas pipelines, and high-altitude mountain surveillance.
Procurement Note: We offer comprehensive sensor integration, customized firmware control protocols (Pelco-D/P, ONVIF Profile S/G/T), and custom structural mounting designs. Schedule a technical consultation with our engineering team.
Infrastructure Integration: Off-Grid & Long-Range Wireless
For critical infrastructure projects (maritime, border, or forest fire detection), we recommend integrating these positioning systems with our autonomous power and data solutions:
- Autonomous Solar Power (300W/180AH) — Reliable 24/7 power for remote long-range cameras.
- Industrial Wireless Backhaul (10km) — High-throughput video transmission without trenching.
- Edge AI Analytics Server — Deep learning backend for long-range target identification.
Professional, heavy-duty wall mount bracket designed for stable, vibration-free installation of large PTZ dome cameras. Designed with an integrated cable chamber, this bracket protects wiring from physical cutting and elements while delivering a clean architectural aesthetic.
Key Engineering Highlights
- Anti-Vibration Engineering: Reinforced structural ribbing on the neck prevents high-speed PTZ cameras from vibrating during rapid panning or zooming.
- Integrated Wiring Hood: Feed cables through the wall directly into the bracket base, sealing out moisture and protecting wires from exposure.
- Excellent Load Margin: Safely supports up to 15 kg (33 lbs) with a 4x static load safety factor, complying with international building standards.
- Premium ADC12 Aluminum: Lightweight yet stronger than cast iron. Powder coating prevents peeling or discoloration under direct afternoon sunlight.
Engineering Specifications
| Parameter | Value |
|---|---|
| Material | Die-cast Aluminum (ADC12) |
| Load Capacity | 15 kg (33 lbs) |
| Mounting Thread | Standard G1.5 female threaded adapter |
| Ingress Seal | Internal rubber gasket ring included |
| Dimensions | 97 mm (W) x 182 mm (H) x 305 mm (D) |
Typical Field Scenarios
The standard choice for mounting high-speed PTZ speed domes onto building brick walls, concrete columns, industrial steel beams, and warehouse loading bay facades.
Procurement Note: Fengtaida B2B platform supports wholesale pricing and customized structural modifications for security mounting brackets. Reach out for custom OEM manufacturing info.
Compatible PTZ Cameras
- PTZ Speed Dome Cameras — Full range of industrial outdoor PTZ domes
- IP66 Power Junction Box — Weatherproof power enclosure for outdoor installs
